MasterVet SILVER Hoof Glue [210 mL]

Cures in 30 sec weight bearing in 2-3 minutes. Uses standard mixing tip. Fresh glue guarantees the highest quality product every use. Do not allow to freeze. Store and use at room temperature (700F or 210C). Cold product needs adequate time to warm core temp. For professional use only. Keep out of reach of children.

First Aid Procedures:

Eyes: Flush eyes with large amounts of water, if condition persists, seek medical attention.
Skin: Remove contaminated clothing, wash area with soap and water, seek medical attention.
Ingestion: Do not induce vomiting. Drink 2 cups of milk or water. Consult a physician.

HOW TO USE

1. Treat the injured claw.
2. Trim the sound claw as flat, clean and dry as possible.
3. Place the Mastervet cartridge into the applicator gun.
4. Remove cap from cartridge and apply mixing tip.
5. Remove any air bubbles before adhesive starts mixing-tap cartridge with tip pointed up then press plunger to start the mixing process.
6. Apply Mastervet adhesive to wood or plastic block.
7. Apply block immediately to prepared sound claw.
8. Hold firmly for 30 seconds. Do not press glue between hoof and block, as layer of glue may become too thin.

Notice: This product is intended for use ONLY as stated on the product. Except for replacement or refund remedies, manufacturer is not liable for direct damages or liable for indirect, incidental or consequential damages regardless of legal theory asserted, including assertion of negligence and strict liability.

MasterVet SILVER Hoof Glue [210 mL] Highlights:

• SKU: 26210
• Manufacturer: MasterVet
• Uses standard mixing tip
• Do not allow to freeze
• Cures in 30 sec weight bearing in 3-4 minutes
• Store and use at room temperature
• Cold product needs adequate time to warm core temp
• For professional use only. Keep out of reach of children
• Fresh glue guarantees the highest quality product every use